Cathodic Protection Quality Inspector

Role: Cathodic Protection Inspector

The basic function of the CP Inspector is to perform inspection services to ensure the quality of work performed in Projects, Master Appropriation (MA), major direct expenditure work orders projects, and verify that dedicated CP system is working and readings meet standards, and adjust rectifier output if necessary, in operation plants.
Scope:
The incumbent will monitor and/or perform quality activities at projects and existing facilities. The incumbent will ensure CONTRACTOR’s WORK or ASSET PROPONENT’S WORK is in compliance using good knowledge of SAUDI ARAMCO engineering requirements, standards, procedures, specifications, and Schedule Q if applicable. The incumbent will provide training to others as and when required. Duties may require physical exertion, working outdoors, confined spaces, high elevations, remote work locations, Verify CP system (impressed current and sacrificial types) are meet standard readings as per SAES-X-Series and drawings in operation plants.

Principal duties:

• Perform “Hold”, “Witness” and “Surveillance” inspections and tests at manufacturing facilities or construction sites to ensure compliance with SAUDI ARAMCO requirements and project specifi
• cations.Inspect material and equipment as applicable to ensure compliance with SAUDI ARAMCO requirements for proper handling, storage and protection at SAUDI ARAMCO facilities and/or construction sites.
• Monitor Contractor’s Quality Systems, records and Quality Personnel for compliance with requirements. Review and evaluate Contractor’s Quality document submittals.
• Witness on-site and off-site material and installations tests for compliance with SAUDI ARAMCO standards.
• Record legibly and accurately all controversial and non-complying construction practices, materials and equipment and report to supervisor detailed potential problems for early resolution.
• Write inspection reports and initiate Non-Conformance Reports (NCRs), Worksheets (WSs) and Equipment Deficiency Report (EDRs) as needed.
• Conduct periodical Inspection activities as per SAEP 309.
• Monitor CP system

Education: BS degree in Electrical Engineering OR Two (2) years industrial/technical College Diploma

Experience: Five (5) years’ experience with a minimum of three years in the inspection field.

Certification: Cathodic Protection Level 2 Certification

Good to have the certificates: National Certification Program Construction Code Inspector (NCPCCI) or NFPA 70 Certified or equivalent

• Have working knowledge of electrical installations, including materials, methods, specifications, and hazardous location identification
• You shall satisfy the requirements of a fully qualified Instrument Technician/ Engineer meeting the requirements laid out by the Instrument Society of America or the Institute of Measurement Control.